RKI Regulator Model 715 with Gauge & Knob, 0.5 LPM Flow Rate Part# 81-1051RK 10.0u back and arms and reflective

back and arms and reflective panels on the shoulders to get you noticed on the job site

Measurement Rates: 0

The water level sensing probe can be easily removed at the link connection and substituted with either the Well Casing Indicator Probe or Well Depth Indicator Probe

Volume / Cycle - 7 oz

RKI Regulator Model 715 with Gauge & Knob, 0.5 LPM Flow Rate Part# 81-1051RK 10.0u back and arms and reflectiveRKI Regulator Model 715 with Gauge & Knob, 0. 5 LPM Flow Rate Part# 81 1051RK Regulators are necessary equipment used to accurately deliver calibration gas from a cylinder to an instrument. Each regulator is designed to fit on a specific set of cylinders. Most of the RKI regulators are designed for non refillable cylinders. There are two common fittings these regulators use to connect to the non refillable cylinders. One common fitting is a CGA 600